acidlab Robokop - Manual (Page 8)

8
Pattern Chaining
In Pattern Play mode, it is possible to chain patterns within a pattern group.
For example, to chain patterns 1 and 2 when pattern 1 is active and running,
press and hold pattern button 1. Then press pattern button 2. The LEDs of
both pattern 1 and 2 will illuminate.
The two patterns will now alternate, with the active pattern blinking and the
other solid.
The chaining of two neighboring patterns is possible with patterns 1-2, 3-4, ...
15-16. Up to all of the 16 neighboring patterns of a bank can be chained. In
addition, you can also chain from the 16th pattern to the 1st pattern!
Examples of possible pattern chains:
2-3, 4-6, 13-15, 1-16,....., 15-3
When you press any two pattern buttons simultaneously, the LEDs of all of the
patterns between them will be lit solid, with the active pattern blinking. The
chained patterns repeat after the last pattern in the chain has been played.
For example:
4 pattern chain: Selected: 2-5
2, 3, 4, 5; 2, 3, 4, 5,....
2 pattern chain: Selected: 13-14
13, 14; 13, 14, ...
Pattern Copy + Paste (Pattern Play Mode)
In Pattern Play Mode, it is possible to copy patterns.
Copy Function
To copy a pattern, press one of the pattern buttons (1-16) while holding down
the Inst/Select- button. The pattern is now saved to the buffer memory and
will remain there until another pattern is selected.