acidlab Robokop - Manual (Page 18)

18
There is one track is available for every Pattern Group.
When changing tracks, the newly chosen track will start after the end of the
current pattern. The track will start with its first pattern. If you switch to
Pattern Play Mode, pattern 1 of the current pattern group will be selected.
Track Play Mode can only be used to select and playback the programmed
tracks.
The Start/Stop Button will return the track to the beginning, where it will start
again from the first pattern in the track.
Track Write Mode
In this mode, you can select and order patterns to form a Track. The Track
can then be played back in Track Play Mode.
To program a track, select the track in Track Play Mode. When you switch to
Track Write mode, the track will be erased, and a new track can be
programmed in its place.
Playing back patterns is the same as in Pattern Play Mode. However, you can
only play patterns from the pattern group currently selected with the rotary
switch.
You can select from the 16 patterns in the group using the row of buttons
(1-16).
The active pattern will be indicated by a blinking LED above the corresponding
button, and will start to play after the end of the last pattern.
The pattern will repeat continuously as in Pattern Play Mode.
By pressing the Write/Next button, you can set the current pattern as the first
pattern in the Track.