acidlab Robokop - Manual (Page 25)

25
Accent-Bus:
If there is no Accent-source connected to the Accent-Bus, then the Accent-Out of
theh Robokop should be connected.
Now it is possible to control acidlab`s drum-modules (e.g. 8BD, 8SD, …) with
the Accent-Bus.
Please do not set the jumper J1 and J2, if there is no modul in the need of the
CV-/Gate-Bus.
Trigger-Connector:
There is an internal trigger-connector, that can be used for internal wiring to e.g.
drum-modules.