acidlab Robokop User Manual
Page 7
7
Pattern Play
The memory of a new Robokop is empty and a pattern must first be
programmed->see Pattern Write Mode.
Patterns are played back in Pattern Play mode.
The active step is illuminated on the the upper LED Row, and runs the length
of the pattern (1-16)
The patterns are selected from one of the 12 pattern groups.
Switching between pattern groups can be done at any time; the switch occurs
at the end of the next pattern. For each of the 12 pattern groups, one of 16
patterns can be selected with the buttons under the LED rows.
The LED over the current pattern blinks to show that it is active. When a new
pattern is selected, the corresponding LED is lit, but stays solid. After the last
step of the current pattern, the sequencer switches to the newly selected
pattern. Now the LED of the new pattern blinks.
In total, 192 patterns are available:
12 pattern groups each consisting of 16 patterns.