acidlab Robokop - Manual (Page 20)

20
A Sync-out Signal will be generated at the Sync socket for other devices that
have a Sync-In socket.
Sync Slave:
If the synchronization switch is in the Sync-In Position, the Robokop’s
sequencer will be slaved to the Sync Clock of an external Sync-Master
connected to the Sync socket.
Sync Master:
If the synchronization switch is in the Sync-Out Position, the Robokop
functions as a Sync Master.
A Sync-out Signal will be generated at the Sync socket for other devices that
have a Sync-In socket.
You can adjust the tempo with the Tempo Knob, and the Start/Stop
button will start or stop the sequencer.
When using a sync cable, all of the pins of the cable must be wired.
Some MIDI cables do not have connections between all the pins, and
thus cannot be used as sync cables.