Analogue Solutions Concussor - Manual (Page 2)

ANALOGUE SOLUTIONS
CONCUSSOR e&oe (c) 12-2007 2
SAFETY INSTRUCTIONS
Please read carefully before using:
• Only use the correct power adaptor - 230V (or 115V whatever your country needs)
• Never handle the adaptor with wet hands
• Never excessivly bend the adaptor cable or get it trapped or place heavy objects on it. If the adaptor cable
becomes damaged, replace the adaptor.
• Ensure the unit is disconnected from the mains before moving or cleaning.
• Always disconnect the unit from the mains if there is lightning in your area.
• Ensure the unit is on a stable surface, and never place heavy objects on top of it.
• Never allow young children or animals to operate the unit or adaptor.
• Do not use excessive force when using the controls or inserting cables to the con nec tors.
• The unit should not be operated in the rain or near water and should not be ex posed to mois ture. If the unit is
brought from a cold environment to a warm one, the unit should be left to reach the ambient temperature.
• Keep Concussor away from heat sources, such as radiators, ovens, heaters etc.
• Never allow Concussor to get wet. Do not operate it near water, like pools, sinks, bathrooms etc. Do not place
beverages on or near it.
• Never open the case or attempt to make repairs. Refer any servicing to a qualified service personnel.
Preventing damage to other connected devices
Concussor modules have a very high dynamic range. It is capable of produce loud signals of very high and sub-
sonic frequencies that could blow inadequate speakers if played too loud. It is recommended that input levels to external
equipement (mixers, amp's etc.) is kept low when first connected, and then sowly increased to a userable level.
Maintenance Instructions
Any cleaning of the Concussor case should be done with a clean lint-free cloth. DO NOT USE SOLVENTS OR
CLEANERS, as this will deteriorate the exterior appearance of the equipment.