Analogue Solutions Concussor - Manual (Page 57)

ANALOGUE SOLUTIONS
CONCUSSOR e&oe (c) 12-2007 57
More GT8 Example Patching
Any step out is a divide by 8 clock divider.
Take step 1 (or any other step output) into the clock of another sequencer.
GT8 controlling open and closed hihats (or 2 monosynths);
Gate out 1 to CH, Gate out 2 to OH.
Use a pulse shaper on the clock input of the GT8 to change the Gate output pulse widths.
Take different step outputs (from same or other GT8 sequencers) and mix them with a multiple to get another gate
sequencer.
When using a clock other than our MC01 master clock module, (as with all analogue sequencers), you must manually
step to the last step of the sequence before you start the clock. This is done automatically when using the MC01.
Using a SQ8, GT8 & MC01;
Run one at 1:1 clock ratio, and the other at a divided down clock ratio, say 1:4 for interesting effects.