Analogue Solutions Concussor - Manual (Page 63)

ANALOGUE SOLUTIONS
CONCUSSOR e&oe (c) 12-2007 63
ATT4 - Quad (4x) Attenuator
Inputs: Outputs: Power:
Signal In x4 Signal Out x4 n/a
Controls: Indicators: Size:
Signal Level x4 - 12HP
Introduction
4 attenuators.
Four independent attenuators (level controls) in one module. Attenu-
ators are passive controls (they use no power) that are used to decrease
the level of an audio or CV signal.
The signal can be changed from full level right down to zero. Use
anytime you need to decrease the level of a signal.
A typical example is in conjunction with our MX61 6 input mixer. As
this mixer does not have level controls, you can use the attenuators of the
ATT4 to adjust the levels before they are mixed with the MX61.
Controls In Detail
The 4 Attenuators are identical.
LEVEL (1-4)
Alters the input signal level
Sockets In Detail
IN (1-4)
Attenuator input.
OUT (1-4)
Output from attenuator.