Analogue Solutions Concussor - Manual (Page 20)

ANALOGUE SOLUTIONS
CONCUSSOR e&oe (c) 12-2007 20
CG88 Conga Module
Inputs: Outputs: Power:
Accent socket 0-12V 3.5mm audio out +/-12V
Trigger socket 5-12V 6.35mm audio out
Controls: Indicators: Size:
Tune Trigger LED 10HP
Level
Introduction
The CG88 is an accurate replica of the TR808 conga sound. The tune range
has been extended so one module can cover low, mid and high Conga sounds.
Use
The trigger input has a range of about 5 to 12V. A trigger or gate signal of at
least 5V will trigger the sound. A larger trigger pulse will increase the level of the
sound (accent the notes). When the accent socket is used, the trigger input socket
only triggers the sound and the level of the sound is controlled by the voltage of
the CV at the accent socket. The accent voltage can be from another trigger pulse
generator, or from an LFO or Envelope. When using for example an LFO, you can
have the level changing with the LFO sweep.
The trigger LED will light each time a trigger pulse is received.
Controls
Tune Sets the drum pitch. Note, the tune can be pitched down below a useful level!
Level Sets output level