Analogue Solutions Concussor - Manual (Page 62)

ANALOGUE SOLUTIONS
CONCUSSOR e&oe (c) 12-2007 62
Multiple
Inputs/Outputs: Size:
2x 4 parallel connected sockets 4HP
(or 1x 8 parallel connected sockets if requested)
Use
The main use of a multiple is to split signals, making it available on more than one socket. For
example, to make the output of an envelope which only has one output socket, available to lots
of inputs. Plug the EG output into the multiple, then the other three sockets will also carry that EG
signal.
The multiple is a passive module. It takes no power.
Introduction
This is a device that is a row of jack sockets all wired together in parallel.
A multiple can be used as a simple passive mixer, but there may be problems of impedance and level matching.
With both audio and CV’s it is a case of try and see.
When a signal is split by a passive device such as a multiple, the output power level will be
reduced. This generally will not cause a problem as most modules’ inputs are buffered.