Aviom A-16R/A-16CS - Manual (Page 11)

2 A-16R P
eRsonAl
M
ixeR And
A-16Cs C
ontRol
s
uRfACe
u
seR
G
uide
System Options:
A‑16D A‑Net Distributor •
A‑16D Pro A‑Net Distributor •
MT‑1 mic stand mount for the A‑16CS Control Surface •
Conventions Used in this Document
Button Presses
When indicating a button on the front panel of the A‑16R Personal Mixer or
A‑16CS, a special typeface is used. For example, “when selecting a Preset,
press the R
ecall
button, followed by a numbered button”.
Using Personal Mixers
It is possible to create a personal monitor system using any combination
of Aviom Personal Mixer products. In some cases the information in this
document can refer to either the table‑top version of the Personal Mixer, or
the rack‑mounted A‑16R version.
When using the A‑16R Personal Mixer with the optional A‑16CS Control
Surface, many of the same buttons and functions are available.
When referring to the use of the mixers in a Personal Monitor Mixing System
in general, the terms A-16 Mixer or Personal Mixer are used to describe a case
where a standard A‑16 or A‑16II Personal Mixer, the A‑16CS Control Surface,
or a rack mounted A‑16R Personal Mixer can be used.
Cat-5 Cables
In most cases Cat‑5e, Cat‑6, and Cat‑6e cables can be interchanged. When
speaking about interconnections between components in a system, the
term Cat-5 is used generically to indicate the use of any of the applicable
cable types.
A-Net Distributors
The A‑16D and A‑16D Pro A‑Net Distributors are referred to generically as
A-Net Distributors.