Read this first important safety instructions – Aviom A-16R/A-16CS User Manual

Page 3

Advertising
background image

iii

READ THIS FIRST

Important Safety Instructions

Read these instructions.

1.

Keep these instructions

2.

Heed all warnings.

3.

Follow all instructions.

4.

Do not use this apparatus near water.

5.

Clean only with a dry cloth.

6.

Do not block any ventilation openings. Install in accordance with the

7.

manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,

8.

stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding‑type

9.

plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding

prong. The wide blade or third prong are provided for your safety. If

the provided plug does not fit your outlet, consult an electrician for

replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particu‑

10.

larly at plugs, convenience receptacles, and the point where they exit

the apparatus.
Only use attachments/accessories specified by the manufacturer.

11.

Use only with the cart, stand, tripod, bracket, or table specified by

12.

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip‑over.
Unplug this apparatus during lightning storms or when unused for

13.

long periods of time.
Refer all servicing to qualified personnel. Servicing is required

14.

when the apparatus has been damaged in any way, such as when

the power‑supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.
No on/off power switches are included in the system. The external

15.

power supply should be used to control power to an Aviom device.

This power supply should remain readily operable.
The solid line over dashed line symbol (

16.

) indicates that the

input voltage must be a DC voltage.
The box within a box symbol (

17.

) indicates that the external power

supply is double insulated.

!

Advertising