Aviom A-16R/A-16CS - Manual (Page 74)

65 A-16R P
eRsonAl
M
ixeR And
A-16Cs C
ontRol
s
uRfACe
u
seR
G
uide
Specifications - A-16R
Audio Outputs Impedance matched output
Headphone Output Front panel; TRS; Tip: Audio Left;
Ring: Audio Right; Sleeve: Ground
Mix input, stereo Balanced 1/4” TRS; front‑panel volume control
Insert send/return Balanced 1/4” TRS
A-Net I/O 1 A‑Net In, 1 A‑Net Out; RJ45 connectors
D/A Conversion 44.1/48kHz, 24‑bit
Indicators Pan: 5 LEDs, 4 red, 1 green;
Channel Volume: 12 red LEDs
Stereo Operation Stereo Link, per channel pair; set at the input
module
Variable pan/spread per channel or channel pair
Tone Controls Treble: +/‑12dB at 9kHz shelving
Bass: +/‑12dB at 160Hz shelving
Output Impedance 140 ohms
Freq. Response
4Hz‑22kHz +0.2dB/‑3dB
THD +N <0.003%
Signal to Noise
(unweighted)
‑90dB typical, A/D to D/A
Measured from AN‑16/i to A‑16II
Crosstalk ‑90dB
Latency 0.880 msec (measured from analog input to
analog output)
Pro16 A-Net uses unshielded Cat‑5e UTP (or better) cable;
maximum 500ft (150m) between devices
Remote Control A‑16CS: A‑Control, RJ45 jack, max. 200 ft (60m)
Compatible with select third‑party controllers via
RS‑232
Power Supply
Input Voltage
Output Voltage
Plug Size
External, DC, universal switching type
100‑240 volts, 50/60Hz, 30VA
18‑24 VDC, 0.5 amp
2 mm
Dimensions, A-16R 19” (482.6 mm) x 6.7” (170.2 mm) , 1U high
Dimensions,
A-16CS
10.75” (273 mm) x 5.6” (142.2 mm);
2.25” (57.5 mm) high
Weight A‑16R 6.8 lbs. (3.08 kg)
A‑16CS 3.4 lbs (1.54 kg)
Options A‑16CS Control Surface
MT‑1 Mic Stand Bracket (for A‑16CS)
EB‑1 Extension Bracket
All Aviom products are designed and manufactured in the USA.