Aviom A-16R/A-16CS - Manual (Page 39)

30 A-16R P
eRsonAl
M
ixeR And
A-16Cs C
ontRol
s
uRfACe
u
seR
G
uide
11 22 33 44 55 66 77 88 99 11 00 11 11 11 22 11 33 11 44 11 55 11 66
Sa
ve
AA--1166RR
Personal Mixer
Solo
Mute
In Recall Mode - All Volumes Zero
Recall
Group Phones
MIDI On
Local
Remote
MIDI Off
M
ut
e
Se
le
ct
M
ut
e
Se
le
ct
M
ut
e
Se
le
ct
Mix In Bass Treble
Master
Volume
Volume
Pan
A-Net
Active
_ + _ +
Press the Group button to create or edit a group.
To create a Group:
Start by selecting a channel that you want to be included •
in the Group.
Press the
• G
Roup
button on the left side of the A‑16R
Personal Mixer or A‑16CS.
The red Group LED will begin to flash indicating that you
•
can now edit the Group.
Double‑click the channel buttons to include a channel in
•
the Group.
Channels that are added to the Group will flash their upper
•
red LED to indicate that they are now part of the Group.
To exit, simply press the G
Roup
button again. The Group LED goes out and
you are returned to your current live mix.
In the current mix, you will now see all channel LEDs associated with a Group
light whenever you press a channel button that is included in your Group.
The channels now behave as one.
P N
ote
: Remember to save the edited Preset if you want to recall the Preset
with the new Group settings later.
Creating Additional Groups
Three Groups can be created and saved in each Preset in a Personal Mixer.
Each Group can be created and/or edited as needed while live audio is
playing through the system.
The instructions in the previous section describe how to create and save the
first Group in a mix. Creating additional Groups follows the same procedure.