Aviom 6416i - Manual (Page 50)

23 F
roNt
P
ANel
F
eAtures
Gain Switch
Each line‑level input channel on the 6416i has an individual four‑position
gain switch that can be used to best match the incoming signal level. The
default setting (no gain change) is 0dB.
The available gain settings are:
+6dB •
0dB •
‑6dB •
‑1 • 4dB
Gain switches are in the analog domain and are not locked out from being
changed when either the Edit Lock or Password protection features are
used.
Managed Button
The Managed button is used to put the network under control of a computer
for firmware updates, system monitoring, etc. Managed Mode can only be
engaged from the network’s Control Master.
When using a PC for firmware updates, etc., a Pro64 module cannot have its
RS‑232 or MIDI port assigned to a VDC when the PC is connected. Deactivate
VDC assignments of this type before entering Managed Mode.
Managed Mode and Edit Lock buttons
To enter Managed Mode, press the M
anagEd
button; its LED will flash. The
Enter/Cancel LED will also flash. Press E
ntEr
to confirm the mode change or
C
anCEl
to return to the previous state.
To exit Managed Mode, press the M
anagEd
button; its LED will flash and the