Aviom 6416i - Manual (Page 67)

31 r
eAr
P
ANel
F
eAtures
13 12 11 10 9 8 7 6 5 4 3 2 1
25 24 23 22 21 20 19 18 17 16 15 14
The pins on the panel-mounted DB25 jacks are
numbered according to the diagram above.
The DB25 panel‑mount connectors have #4‑40 UNC thread.
 N
ote
: Strain relief is suggested when using DB25 cable assemblies. DB25
breakout cables should always be supported when connected to a
Pro64 product to reduce the risk of damaging the Pro64 product’s
rear panel.
Alternate Input
The DB25 Audio Thru connections can also be used as an optional main input
path. Signals connected to the DB25 connections will be metered and can be
made active on the network in the same manner as the XLR inputs.
Do not use the XLR jacks and DB25 Alternate In connections for inputs to the
same set of channels on the 6416i simultaneously.