Aviom 6416i - Manual (Page 82)

18 b
uildiNg A
P
ro
64 N
etwork
In the previous example of a stage and front‑of‑house system, adding a
digital copy of the FOH engineer’s inputs for a recording system can be
accomplished by connecting Pro64 output modules to the input module at
front‑of‑house. Unlike Auto Mode, however, this input module needs to be
set to send audio data to its A‑Net Port B in order to make the digital split
work.
The example assumes that all modules are set to the same A‑Net Slot range.
By setting the FOH input module to transmit its A‑Net data to Port A and B,
the A‑Net data flows in two directions. Digital audio arriving at the front‑of‑
house location from the stage is replaced by the input module at FOH.
To send the stage audio to the recording system instead, set the input module
at front‑of‑house to transmit its data out Port A only. By doing this, the audio
from the stage flows through all the modules to the recording system.