Aviom 6416i - Manual (Page 55)

28 vdc c
oNFigurAtioN
Deactivate an Active VDC Slot
To release an active input assigned to a VDC Slot, use the inc/dec button
to scroll to the active VDC Slot. (Its In Use LED should be on.) Press the
selector button below the Assign Port LEDs until no VDC data type LED is
lit. The Enter/Cancel LED will be flashing. Press E
ntEr
to deactivate the VDC
Slot assignment and make that VDC Slot available to other modules in the
network.
 N
ote
: Only VDC inputs need to be deactivated to free Virtual Data Cable
resources. VDC outputs do not reserve any of the fourteen Virtual
Data Cable resources.