Aviom AllFrame - Manual (Page 24)

12 a
ssembling The
a
ll
f
rame
s
YsTem
ALL FRAME
™
Multi-Modular I/O System
To install the mounting brackets:
Place the F6 on a clean, level work surface. 1.
Align the non-threaded holes in the bracket with the threaded holes in either the front or 2.
rear mount positions in the top panel of the F6.
Install the included Phillips screws through the holes in the bracket and into the F6,
3.
tightening them securely.
Repeat for the remaining bracket on the bottom panel of the F6.
4.
SCALE 1.000
Attach the mounting brackets to the F6 Modular I/O Frame with the screws provided