Aviom AllFrame - Manual (Page 92)

80 s
PeCifiCaTions
ALL FRAME
™
Multi-Modular I/O System
F6 Modular I/O Frame Specifications
Channels Up to 24 inputs
Up to 24 outputs
(Maximum: 24x24)
I/O Card Slots 6; User configurable
A-Net 2 EtherCon RJ45 connectors
2 100Mbps Ethernet SFP fiber optic transceiver slots
A-Net I/O ports 2 copper Cat-5e and 2 fiber; 4 total;
Maximum simultaneously
usable A-Net ports
A maximum of two A-Net ports can be active at any time;
Auto sensing scans the Cat-5 copper and SFP fiber ports at
power up to determine which ports are to be made active;
Any combination of Cat-5 and/or fiber can be used.
SFP Fiber Optic Transceiver
Requirements:
100 Mbps Fast Ethernet; Class 1 laser device
SFP: use duplex LC connector
Supports Single-mode or Multi-mode fiber
Note: SFP fiber transceivers are not included and must be
purchased separately.
A-Net Cable Length 400 feet (120 meters) Cat-5e between devices;
Cat-6 cabling is suggested for best performance at long
distances.
Solid core (as opposed to stranded) cabling is suggested for
best performance at long distances.
Fiber optic distance performance varies according to the type
of SFP transceivers used (single/multi) and the transceiver’s
light-handling specifications.
Sample Rates 1x: 39.7–52kHz;
2x: 79.4–104kHz;
24-bit resolution
Routing and Control Via computer using Pro64 Network Manager software
Computer Interface 1x USB;
Type B connector
Latency Analog input to analog output: <800µs
Maximum Ambient
Operating Temperature
0˚C to 50˚C (32˚F to 122˚F)
Cooling 3 ultra-quiet low-velocity fans;
Thermal monitor circuitry provides warnings for fan failure or
excessive temperature.
Voltage
(measured at the input of the
AllFrame F6)
22-60VDC, inclusive of tolerance