Sk6 stage kit, Installing the sk6, Sk6 stage kit installing the sk6 – Aviom AllFrame User Manual
Page 30: All frame
18
a
ssembling
The
a
ll
f
rame
s
YsTem
ALL
FRAME
™
Multi-Modular I/O System
SK6 Stage Kit
The SK6 Stage Kit is designed as a protective stage box for an F6 Modular I/O Frame, part of the AllFrame system
of modular I/O products. The SK6 Stage Kit also provides shock mount protection for the assembly when an
AllFrame is transported or used on stage as a drop box.
The kit includes the protective metal case with shock mount foam, a replacement ventilation panel, plus the
screws required to secure the SK6 Stage Kit components. A Phillips screwdriver is required for assembly.
Installing the SK6
Remove the Original Side Ventilation Panel:
Place the F6 Modular I/O Frame with its front face up on a clean work surface.
1.
Remove the L-shaped
2.
mounting brackets from the top and bottom of the F6 if they were
installed for a previous application .
Remove the two Phillips screws from the top face of the side ventilation panel of the F6
3.
.
Remove the four screws from the side panel of the ventilation panel
4.
.
Set the ventilation panel aside. (The screws will be reused in the following steps.)
5.
Remove the side ventilation panel and any previously installed mounting brackets.
P
N
ote
:
Save the original side ventilation panel for future use in case the F6 is installed in a different type of
enclosure. The design of the ventilation panel is an integral part of the F6 cooling system.