Aviom AllFrame - Manual (Page 31)

19 a
ssembling The
a
ll
f
rame
s
YsTem
ALL FRAME
™
Multi-Modular I/O System
Install the SK6 Side Ventilation Panel:
Align the replacement SK6 side ventilation panel with the side of the F6. 1.
Install two screws through the holes in the ventilation panel into the top of the F6 2.  .
Install the four screws that secure the side of the ventilation panel 3.  .
Tighten all six screws. 4.


Install the new ventilation panel.
Place the Completed F6 into the Stage Kit:
Orient the SK6 case so that the opening for the network connections 1.  is aligned as
shown in the diagram.
Slide the F6 into the SK6 case from the top down (to allow the EtherCon connectors clear
2.
the foam) until it fits snugly against the foam shock mounts on all sides .


Place the F6 into the SK6 case, oriented as shown.