Control master switch, Usb connector, Control master switch usb connector – Aviom AllFrame User Manual
Page 54: All frame
42
f6 f
ronT
P
anel
C
omPonenTs
ALL
FRAME
™
Multi-Modular I/O System
Control Master Switch
To use the F6 Modular I/O Frame as the Pro64 network’s Control Master device, move the
C
ONtrOl
M
Aster
switch
to the up position. Remember that only one Pro64 device per network can be set as the Control Master.
USB Connector
Beneath the front panel cover plate on the F6 is a USB Type B connector to allow a computer to be connected
for firmware updates or for when the F6 Modular I/O Frame is used as a connection point for the Pro64 Network
Manager software used to program and control the network. The F6 must be the network’s Control Master to use
the USB connection to send control information from Pro64 Network Manager.
The USB driver is installed during the Pro64 Network Manager software installation.