AYRE DX-5DSD - Manual (Page 107)

Edge Enhancement [ -16–0–16 ]
Noise Reduction [ 0–8 ]
Y© Delay [ -16–0–16 ]
Border Level [ 0–16 ]
Primary Output [ HDMI | Component ]
(The only video output on the Ayre DX-5
DSD is the HDMI
A/V Output. Selecting “Component” will yield no picture.)
TV Aspect Ratio [ 4:3 Letterbox | 4:3 Pan & Scan |
16:9 Wide | 16:9 Wide/Auto ]
(“4:3 Letterbox” is correct for a standard 4:3 display. “16:9
Wide/Auto” is correct for a widescreen 16:9 display.)
TV System [ NTSC | PAL | Multi-system ]
(”Multi-system” provides no format conversion. Video discs
of each television system will be output in their native format.
If your display does not accept both NTSC and PAL
formatted signals, select the proper format for your display.)
Output Resolution [ Auto | 1080p | 1080i | 720p |
480p/576p | 480i/576i | Source Direct ]
(Select the proper output as explained on page 70.)
1080p24 Output [ Auto | On | Off ]
DVD 24p Conversion [ On | Off ]
HDMI Options
De-interlacing Mode [ Auto | Film Bias Mode |
Video Mode | 2:2 Even | 2:2 Odd ]
CUE Correction [ Auto | On | Off ]
Color Space [ Auto | RGB Video Level | RGB PC Level |
YCbCr 4:4:4 | YCbCr 4:2:2 ]
HDMI Deep Color [ 36 Bits | 30 Bits (dithered) |
30 Bits | Off (dithered) | Off ]
105