AYRE DX-5DSD - Manual (Page 57)

When the display is off, pressing any button will
illuminate the display for a few seconds. If the disc
is playing when the display is off, pressing “Play”
will illuminate the display without affecting
playback.
Power
In addition to the red “Power” button that toggles
the power state of the DX-5
DSD
, there are also
discrete power buttons. These will not be used in
normal use, as the user can see the state of the unit
at a glance. However, they may be useful with an
aftermarket programmable remote control that can
create sequences of commands.
P/N
The “P/N” button provides a shortcut for changing
the “TV System” from PAL to NTSC to
Multi-system. Normally this setting only needs to
be changed if the display is replaced. To prevent
accidental activation, the button must be held for
five seconds with no disc playing. For more
information, please refer to “TV System” on page
69.
Resolution
The “Resolution” button provides a shortcut for
changing the “Output Resolution”. Normally this
setting only needs to be changed when the display is
replaced. For more information, please refer to
“Output Resolution” on page 70.
55