AYRE DX-5DSD - Manual (Page 18)

Output Resolution
Not only does the Ayre DX-5
DSD
Digital A/V
Engine play high-definition Blu-ray discs, but it
also has a world-class scaling engine that
up-converts standard definition video stored on
DVD discs. The sophisticated video processor
ensures that the video will have the best possible
color, detail, and motion.
The player offers several video output resolutions.
To achieve the best visual result, it is important to
select the output resolution that best matches your
display device. The rule of thumb when selecting an
output resolution is to match the “native resolution”
of your display.
The default setting from the factory is Auto. This
selection allows the display to communicate with
the player in order to establish the best resolution. If
there is difficulty with this setting, or if you wish to
select the resolution manually, use the “Up/Down”
arrow buttons to select
Output Resolution and then
press “Enter”.
For the latest generation of 1080p, “Full HD” or
“True HD” displays, the best output resolution will
be 1080p. (A few early model 1080p displays do
not accept 1080p signal. For these displays the best
output resolution to use is
1080i.) For all other
digital televisions this will likely be 720p. For CRT
tube or rear projection televisions this will likely be
1080i. These are general recommendations that
work for most users, but there can be exceptions.
Consult the owner’s manual for your display.
16