AYRE DX-5DSD - Manual (Page 50)

To address this problem, the Ayre DX-5 DSD offers a
mode whereby the LFE channel is mixed in with the
main channels for playback through the Analog
Audio Outputs. Simply press the “Setup” button on
the remote control handset, and then the numbers
“7 - 1 - 2 - 0” (for 7.1 channels to 2.0 channels).
The LED indicator on the front panel will glow red
to show the “LFE Mixdown” mode is active. To exit
the “LFE Mixdown” mode, press the “Setup” button
followed by “0 - 0 - 0 - 0”.
To achieve the mixing of digital signals
of different levels, the output level is
reduced by 6 dB. This requires an
increase of the system’s volume. Do
not forget to reduce the volume before
exiting the “LFE Mixdown” mode.
The “LFE Mixdown” mode is only for those
multi-channel discs that have been improperly
authored. Do not use it for two channel discs.
Viewing DVD-A Pictures
Some DVD-Audio discs contain static pictures, such
as photos of the band or song lyrics. When a
DVD-Audio track is playing, you may use the “Page
Up” button to select the previous picture or the
“Page Down” button to select the next picture.
Display
During the playback of a DVD or Blu-ray disc, press
the “Display” button on the remote control to show
48