AYRE DX-5DSD - Manual (Page 69)

• Border Level: Sets the brightness level of the
border area when borders are inserted by the
player to maintain correct aspect ratio. The
default level is 0, which corresponds to total
black. If you set it to a positive level, the bars
gradually become lighter grey instead of black.
This setting may be useful for users with plasma
or CRT TVs that are sensitive to “burn-in”. A
grey border setting allows the phosphor in the
bar area to be moderately used, matching the
active portion of the screen and can alleviate the
burn-in problem.
The Border Level setting only applies to the
HDMI output, and only affects borders inserted
by the player. If the borders are encoded in the
original video, the border brightness level will not
be affected by this setting.
Primary Output
Selects the primary video output port. The options
are:
• HDMI (default) – Use HDMI as the primary
video output port. This setting will ensure that
the display receives a purely digital signal for
the best possible picture quality.
The Anchor Bay Technology VRS video processor
will be used unless “Source Direct” output
resolution is selected, in which case VRS video
processing is bypassed.
• Component – The component analog video
outputs have been removed from the Ayre
DX-5
DSD .
67