AYRE DX-5DSD - Manual (Page 92)

Remote Control Code
The Ayre DX-5
DSD
can respond to one of 4 sets of
remote control codes. The default is “Code 1”. If you
have other products that respond to the DX-5
DSD
remote control, you can select a different remote
code to avoid conflicts. The available codes are:
• Code 1 (default) – Remote code set 1. This is
the normal remote code.
• Code 2 – Remote code set 2. Use this code if
you have other products that conflict with the
Ayre DX-5
DSD
.
• Code 3 – Remote code set 3. Use this code if
you have other products that conflict with the
Ayre DX-5
DSD .
• Alt. Code – Alternative remote code. The
alternative remote control code enables users to
program universal remote controls that come
with a display or A/V receiver to operate the
Ayre DX-5
DSD player. If the universal remote
control has a DVD player control function,
program it with the code for Toshiba, Philips,
Magnavox, Marantz, or Zenith DVD players.
You may need to try several times using
different codes to find a working code.
If you have selected a new remote code, you must set
the remote control handset to use the same code.
Please refer to “Remote Code” section on page 39 of
this manual for details. If you have selected “Alt.
Code”, the supplied handset will not operate the
player, and you must use a universal remote control
with the properly configured code set.
90