AYRE DX-5DSD - Manual (Page 68)

• Detail Enhancement (Sharpness): Adjusts the
sharpness of video output. Detail enhancement
level can be set between -16 and +16. The
default is level 0, which turns off detail
enhancement.
This control is unnecessary when the video disc
provides a high-quality signal. Its use should be
limited to attempts to improve low-quality discs.
• Edge Enhancement: Adjusts the sharpness of
object edges in the video. Edge enhancement
level can be set between -16 and +16. The
default is level 0. Level 0 turns off edge
enhancement.
This control is unnecessary when the video disc
provides a high-quality signal. Its use should be
limited to attempts to improve low-quality discs.
• Noise Reduction: Adjusts the video noise
reduction processing. Noise reduction levels can
be set between 0 and 8. The default is level 0,
which turns off noise reduction.
This control is unnecessary when the video disc
provides a high-quality signal. Its use should be
limited to attempts to improve low-quality discs.
• YC Delay: Adjusts the time difference between
the Luminance (Y) and Chrominance (Cr)
channels of the video signal. The YC delay
setting applies to the HDMI output only.
This control is unnecessary when the video disc
provides a high-quality signal. Its use should be
limited to attempts to improve low-quality discs.
66