AYRE DX-5DSD - Manual (Page 16)

TV Aspect Ratio
The Ayre DX-5
DSD
comes from the factory
pre-configured for proper operation with a
“widescreen” (16:9). This will work for the vast
majority of systems. However if you have an older
“standard” (4:3) display, you will need to change the
menu item TV Aspect Ratio.
Use the “Up/Down” arrow buttons to select the
proper menu item and then press “Enter”. Use the
“Up/Down” arrow buttons to select 4:3 Letterbox
and then press “Enter”. If you have inadvertently
changed the setting, the correct selection for a
“widescreen” display is 16:9 Wide/Auto.
14
4:3 Display
16:9 Display