BUCHI KjelFlex K-360 - Manual (Page 33)

6 Operation
33 KjelFlex K-360 Operation Manual, Version C
6 .2 General information on buttons
The following control buttons are available in the software for navigation and input confirmation:
Go to the main menu
Confirm a message and get back to the previous screen
Save
Close a screen (without saving) and get back to the previous one
Delete
Edit
Mark the currently highlighted result/method in the list as first result/method on a report
Mark the currently highlighted result/method in the list as last result/method on a report
Add 10 ml of H
2
O
Add 10 ml of H
3
BO
3
Add 10 ml of NaOH
Add 10 ml of reagent
Go to the method screen to view, define or edit a method
Go to the Method List screen
Print
Switch from Standby to Ready mode
Go to the sample screen to define a sample
Switch from Ready to Standby mode
Go to the status screen to view the status, the time and the user logged in
Reset the operating hours / numbers of distillation
Switch to the screen with Operational Tests
Switch to the screen with Test Sensors
Switch to offline operation in the Operational Tests screen
Switch to online operation in the Operational Tests screen
Run the pump in the Pump Calibration screen
Calibrate the pump in the Pump Calibration screen