BUCHI KjelFlex K-360 - Manual (Page 45)

6 Operation
45 KjelFlex K-360 Operation Manual, Version C
6 .8 .4 Result screen
If a titrator has been connected to the K-360, which does not provide direct data transfer, the result
screen opens after a distillation. The corresponding ml-value indicated on the connected titrator can
be manually added under Result via keypad. Press OK to save the entry.
Fig. 6.17: Result screen
In case the connected titrator provides direct data transfer, the result is stored automatically.
If no titrator is connected, no Result screen is displayed.
6 .8 .5 Result list
To view the list of results measured, go to Results in the main menu and press Enter or just press 6.
The Result List opens:
Fig. 6.18: Result list
The result list can hold a maximum of 500 results. If this number is beeing exceeded, the “oldest”
results in the list will be overwritten successively by new results.
To print out a selection of results, highlight the first result and press the First button. Then highlight the
last result that should appear in the list and press the Last button to define your selection. Now press
Print.
For a detailed printout of a result, highlight a single result in the list and press Print.