BUCHI KjelFlex K-360 - Manual (Page 35)

6 Operation
35 KjelFlex K-360 Operation Manual, Version C
6 .3 .4 Individual working method
The software offers two working methods for sample determination, the single sample analysis and
the rack oriented analysis.
Single sample analysis
This working method is straight forward and is used especially when you are not interested in sample
name input and storing the volume consumption of the titrant solution in the system memory, see also
chapter 6.8.1.
Rack oriented analysis
Here all sample names and the corresponding weight is entered prior to determination. The volume
consumption of the titrant solution is stored together with the sample name, see also chapter 6.8.2.
You can switch between these two working methods at any time.
6 .4 Configuring the instrument
To configure the instrument in the Main Menu go to Configuration and press Enter. The following
screen appears:
Fig. 6.2: Configuration
NOTE
To access the individual menus you can either use the arrow keys to move up and down in the list
and press Enter or the Forward button or you can type in the number of the corresponding menu
directly (e.g. 3 for Settings).