6 .6 continuous mode - programming example – BUCHI Extraction System B-811 LSV User Manual

Page 39

Advertising
background image

6 Operation

39

B-811 Operation Manual, Version G

Function key

Display

Description

Display

H: MIN blinks Select the extraction time (0 - 99:99 h) using the / keys

In the

Hot Extraction Mode the only stop criterion used is

the extraction time. When the extraction time has expired the
program switches to the next step

Display

STEP 2 blinks (STEP 2 = Rinsing)

Display

HEATING

blinks

Select the heating level (1 - 20) using the / keys
Select level 13 for toluene
In case of oxygen-sensitive analytes, the gas supply must be
activated by pressing the INERT GAS key
The inert gas valve is automatically opened up while the step
starts

Display

H: MIN blinks Select the rinse time (0 to 99:99 h) using the / keys

Display

STEP 3 blinks (STEP 3 = Drying)

Display

HEATING

blinks

Select the heating level (1 - 20) using the / keys
Select level 4 for toluene

Display

H: MIN blinks Select the drying time (0 to 99:99 h) using the / keys

In case of oxygen-sensitive analytes, the gas supply must be
activated by pressing the INERT GAS key
The inert gas valve is automatically opened up while the step
starts

SELECT No display blinks

The entered program is stored as program 0.
To store this program under a different program number, please
see chapter 6.7

6 .6

Continuous Mode - programming example

Program description:
In the continuous mode, known as Twisselmann Extraction, the magnetic valve is opened during the
entire extraction step.
The sample is always extracted with fresh solvent. Solvent: petroleum ether 40/60, for other heating
levels see chapter 5.12.

Function key

Display

Description

SELECT The Mode display

blinks

Select the

Continuous Mode using the / keys

Display

STEP 1 blinks (STEP 1 = Extraction)

Display

HEATING

blinks

Select the heating level (1 - 20) using the / keys
Select level 9 for petroleum ether 40/60

Display

H: MIN blinks Select the extraction time (0 - 99:99 h) using the / keys

The only stop criterion used for

STEP 1 is the extraction time

Display

STEP 2 blinks (STEP 2 = Rinsing)

Advertising
This manual is related to the following products: