Cannon Instrument miniQV-X - Manual (Page 72)

CANNON ® miniQV-X Automatic Viscometer with VISCPRO ® Instruction & Operation Manual
Version 1.0— October, 2008; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
66
The Sample Action popup
Sample actions
No action—clears action column for highlighted samples. No testing
will take place for this tray position.
Measure kinematic viscosity—measures sample viscosity.
Verify Known KV—measures sample viscosity at the conclusion of
the automated test and tags data for possible use in calibrations/
reports.
Configure—Opens the Viscosity Action window (see next section)
to select test actions for selected individual samples/standards. The
Configure options will vary depending on the selected sample action
(Measure Sample Viscosity or Verify Known KV).
Delete—Deletes currently-selected sample data. Samples in suc-
ceeding tray positions will be moved up to fill the empty “slot”.
Insert At—Inserts a sample field at the currently-selected location.
Copy All Selected Samples—copies selected sample IDs
Paste Into Selected Samples—pastes selected sample IDs
Sequential Sample IDs—Numbers selected samples automatically.
Clear All Trays—Clears sample data for all trays.
Viscosity Action window
The Viscosity Action window permits you to set test parameters for
individual samples, overriding the general settings. For information on
general settings, refer to Tray Settings: Test.
The Viscosity Action window