Cannon Instrument miniQV-X - Manual (Page 75)

69
CANNON ® miniQV-X Automatic Viscometer with VISCPRO ® Instruction & Operation Manual
Version 1.0— October, 2008; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
lighted sample (or samples) will be deleted and any existing sample
entries following the removed items will be moved up to take their place
in the sample run sequence.
Saving Sample ID information
Many users will test the same series of samples on a regular basis for
trend analysis and other quality control objectives. To save time with
Sample ID data entry, VISCPRO provides an option for saving and
recalling Sample ID information.
Saving Sample IDs To save Sample IDs, complete your sample ID data entry (see previous
sections) from the Sample Input window, then click the Save IDs
button. The Samples window will open.
Input an ID for the saved sample sequence in the Save As: field. Then
select which instrument(s) to associate with the Sample ID sequence.
Then click OK.
Restoring Sample IDs To restore Sample IDs previously saved, click Configuration and select
the desired instrument. Then click Restore Instrument and Tray
Settings from the Configuration options. The Load Instrument and
Tray Settings window will open.
Select which data is to be restored by clicking on the desired Restore
options (Restore Instrument Settings, Restore Tray Settings, and/or
Restore Sample Information). The Load Instrument and Tray
Settings window permits you to restore the following Instrument
Settings: Instrument UserID, check standard prompts, temperature
calibration offsets