Cannon Instrument D155 Density Meter - Manual (Page 15)

12
< Rear panel >
7) Peristaltic pump “IN” (if equipped)
The sample outlet is connected here.
8) Peristaltic pump “OUT” (if equipped)
The tube for draining out the sample or solvent can be connected here.
9) Peristaltic pump (if equipped)
This pump transfers sample liquid by peristaltic movement.
10) RS-232C port
An optional printer or a personal computer (PC) can be connected here.
11) ∼ LINE
The AC Mains power cord is connected with this receptacle.
12) Power switch
Turn on or off the unit with this switch.
13) Fuse holder
A miniature 5x20mm cartridge fuse is housed in here. Only replace the fuse with like rating fuses
(T3.15A 250V) as noted on the rear label of the instrument
14) USB port
Use for connecting an external USB storage device for exporting stored data from the density meter.
This port is also used to uploaded firmware to the density meter.
12
10
9
8
7
11
13
14
CANNON ® D155 Density Meter Instruction & Operation Manual
Version 1.1b – August 2014; CANNON® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA