ChemoMetec NC-250 - Manual (Page 25)

991-0252 Rev. 1.1 February 2013 25
File Properties
The file properties window contains three or four tab pages:

General with the file name and the sample ID. The sample ID can be edited after an analysis has
been completed. In the Log field the user can optionally enter comments about the image file that
will logged in the file.

Details that contain information about the image file.

Description where a description of the actual image channel is displayed together with a potential
comment about the image channel. The Channel number can be changed by clicking the arrow up
or down buttons.

Post Processing which describes details about the post processing performed for the *.cm file. This
tab page is only present when a corresponding *.cmpp post processing file has been saved in the
Plot Manager.