Image overlay on the user interface – ChemoMetec NC-250 User Manual
Page 27
991-0252 Rev. 1.1
February 2013
27
Image Overlay on the User Interface
An image overlay may be enabled with the
button in the right bottom corner of the image. It performs
two kinds of cell marking on the displayed image:
When an analysis is completed successfully, cells that are included in the analysis are marked with a
square.
When a large scatter plot or a large histogram is open in the plot manager the cells inside or
outside the selected marker or gate respectively, can be marked with the overlay rectangles by
selecting ‘Add Cells Inside Selected Gate to Image Overlay’ or ‘Add Cells Outside Selected Gate to
Image Overlay’.
The cells are marked with rectangles and this overlay can be toggled on and off by clicking the
button.
See the large scatter plot for details about polygons and cell gating. See the large histogram plot for details
about markers and cell gating.