ChemoMetec NC-250 - Manual (Page 28)

991-0252 Rev. 1.1 February 2013 28
Next Run
When a run is completed, the main result is displayed at the bottom right of the user interface and detailed
results are displayed in the result tab page.
Input fields: The user may optionally enter a sample ID before each sample is run. The sample ID will be
used as last part of the image file name for all images shot for the respective protocol. The user may
optionally change the operator or the volumes used for the next sample run.
When the input fields have been filled out, press the ‘Run’ button to start the next analysis. All the settings
will be transferred to the results.