COP-USA ASH56NVIR-36S - Manual (Page 13)

9
service life, low power, only up to 5W, its unique encapsulation technology may
ensure 10000h optical attenuation ＜5%, and overcome the fatal shortage of
conventional infrared lamp: high optical attenuation
¾ For its single-point high power may be regarded as a spot light source, a kind of
angle variable infrared lamp was developed, synchronous varying with the viewing
angle of integral camera, ensure neither the power waste of the infrared lamp, nor
flashlight effect, maximize the execution of infrared ray, and overcome the shortages
of several tens watts and large size for conventional long distance camera.
¾ Its intelligent synchronization and self-identification mode are the world pioneer,
and are able to automatically identify the integral camera of Sony, Hitachi, and CNB
etc, the most human-orientization product today.
1.6.7 Laser synchronous features—suitable for laser synchronous pan/tilt
¾ The laser light source may be continuous electric zooming: the electric zooming
device specially designed for semiconductor laser may adjust the optical pattern
according to the monitoring range and distance, the laser angle may be carried out
the 18 magnification varying from 1°to 18°, during zooming, the optical pattern of
laser has no dither, after special treatment, the laser transparency of optical lens may
be up to 98% and above;
¾ Laser spot equidistribution: due to optical fiber output semiconductor laser, after the
laser source merged into fiber, through a unique equidistribution technology, ensure
high light level and high homogeneity;
¾ Unique omni bearing inching device: high accurate pan and tilt inchining device,
convenient for adjusting the laser beam and coaxial camera;
¾ Long service life of laser: with Germany laser chip, encapsulated through Au-Sb
eutecrod, complete aging test technology and advanced fiber coupling technology
etc, ensure the service life of laser more than 10000h;
¾ The laser control is usually in auto mode, the laser shall function automatically
following the camera low light level ON/ OFF; when the magnification of camera is
changing, the laser shall follow to function together, so as to minimize the loss of
laser.