COP-USA ASH56NVIR-36S User Manual

Page 5

Advertising
background image

1

Attentions:

No direct vision of laser window to avoid the irradiation of direct ray or

scattered ray of laser to eyes or skin; when irradiated with laser, the

window of laser must be kept away more than 8m.

¾

Electrical safety

Strictly obey all relevant national and local electrical standards during the installation and

operation of this product. It has a self-restraint special power supply, with both DC12V

(on-board), and AC24V (general pan/tilt) input modes. During operation, obey all relevant

electrical safety standards. During transmission, both RS-485 and video signal shall be

kept away from HV equipment or cable the enough distance, if necessary, the protective

measures against such as lightning and surge etc should be also provided.

¾

Transport safety

During transport, storage and installation, avoid the damages from stress, vibration, and

soak etc to this product; this product shall be wholly packaged for transporting, no matter

whether it is delivered from the supplier or returned for repair, if the product is damaged

due to not packaged according to the specified method, the warranty shall be invalid.

¾

Installing safety

During installing, please carefully refer to the installation manual, handle the pan/tilt

gently, no squeezing to the components, otherwise it may cause mechanical problems; the

camera glass belongs to high level optical product, no direct touch with hands, otherwise

the glass shall be scratched and produce adverse influences to the imaging quality.

¾

Qualification of maintenance workers

All relevant installation and maintenance work shall be completed by the qualified persons.

If any problems found, no any repairs without authorization, firstly refer to the instruction

manual to find the causes. The repairs must be done by our company’s authorized persons.

¾

No removal of camera without authorization

No removal of pan/tilt screws or protective cap, forbid to repair the pan/tilt without

authorization.

¾

Environmental requirements

Temperature: -35℃~+55℃ humidity: 90% air pressure: 86-106kpa

Advertising