COP-USA ASH56NVIR-36S User Manual
Page 18
14
patrol trajectory, the first line scan, the first self-learning.
¾
Alarm switch: alarm ON/OFF. Each alarm may be set independently.
¾
Return to the previous menu.
2.3.3 Display
setting
¾
Camera ID: enter the address display submenu.
¾
id display: when it is set to ON, the monitor shall display the
dome address, such as “cam 001”, default ON.
¾
Display position: set the position for displaying the dome address,
which may be displayed at four positions of left upper corner, right
upper corner, right lower corner, and left lower corner.
¾
Return to the previous menu.
¾
Angle display: enter the angle display submenu.
¾
Display switch: set the angle display ON/auto OFF /OFF.
¾
Display position: set the angle display position at the top/bottom of
screen.
¾
Return to the previous menu.
¾
Preset label: enter the preset header display submenu.
¾
Display switch: set the preset header ON/OFF, when it is set to ON,
then during the adjustment of presets, the preset header shall be
displayed at the left of screen.
¾
Display position: set the position for displaying the preset point
header, either the top or bottom of screen.
¾
Return to the previous menu.
¾
Dome label: enter the dome header display submenu
¾
Display switch: set the dome header display ON/OFF.
¾
Display position: set the position for displaying the dome header at
the top or bottom of screen.
¾
Return to the previous menu.
DISPLAY SETUP
1 . < CAMERA ID >
2 . <ANGLE DISPLAY >
3 . < PRESET LABEL >
4 . < DOME LABEL >
5 . RETURN
CAMERA ID
1 . DISPLAY
: OFF
2 . POSITION :
3 . RETURN
DISPLAY SETUP
1 . < CAMERA ID >
2 . < ANGLE DISPLAY >
3 . < PRESET LABEL >
4 . < DOME LABEL >
5 . RETURN
ANGLE DISPLAY
1 . DISPLAY
: OFF
2 . POSITION :
TOP
3 . RETURN
DISPLAY SETUP
1 . < CAMERA ID >
2 . < ANGLE DISPLAY >
3 . < PRESET LABEL >
4 . < DOME LABEL >
5 . RETURN
PRESET LABEL
1 . DISPLAY
: OFF
2 . POSITION :
TOP
3 . RETURN
DISPLAY SETUP
1 . < CAMERA ID
>
2 . < ANGLE DISPLAY >
3 . < PRESET LABEL >
4 . < DOME LABEL >
5 . RETURN
DOME LABEL
1 . DISPLAY
: OFF
2 . POSITION :
TOP
3 . RETURN
BOTT-R