Power on, 3 rear view for 16-ch dvr – COP-USA DVRHD-8D1 User Manual
Page 117
4/8/16 CH DVR Quick Start Guide
11
Network port
12
Connect to external sensor1-8
13
4ch relay output. Connect
to external alarm.
14
Connect to speed dome
15
Connect to keyboard
16
Grounding
17
For cooling the device
18
POWER INPUT
19
POWER SWITCH
2.3 Rear view for 16-ch DVR
2-3 Rear view for 16-ch DVR
1
Video out：Connect to monitor
2
Video input channels from 1-16
3
Connect to HDD for backup
4
For outputting 1-16ch image
independently
5
Connect to monitor as an AUX
output channel by channel. Only
video display, no menu show
6
Audio output, connect to the sound box
7
Talk
8
Connect to high-definition display
device
9
VGA output, connect to monitor
10
16 CH Audio input
11
Connect to USB mouse
12
Network port
13
Connect to external sensor1-16
14
4ch relay output. Connect to external
alarm
15
Connect to speed dome
16
Connect to keyboard
17
Grounding
18
For cooling the device
19
POWER INPUT
20
Switch on/off
3. Power on
Step1: connect with the source power; switch on the power button near the
power port in the rear panel
Step2: the device will be loaded, and the power indicator will display blue
Step3: before start, a WIZZARD window will be pop-up and show some
information about time zone，time setup ，network configuration, record
configuration and disk management. User can setup here and refer to the
concrete setup steps from the corresponding chapters. If users don’t want to
setup Wizard, please click Exit button to exit.
After the device power on, if there is no menu or only has live image display,