COP-USA DVRHD-8D1 - Manual (Page 68)

62
Digital Video Recorder User Manual
Screen display mode:
Click the icon beside the screen display mode,
channel select dialog will appear as below:
Take 8-channel DVR for example: user can tick off
channels form 1-ch to 16-ch at random to display the
live pictures, 8 channels can be selected at most. Then
click OK button to confirm the setting.
Fig 7-3 Channel select dialog
Snap pictures
Click “Snap”
icon, the system will automatically capture pictures and save those pictures in the computer.
User should set up the save path for those picture in the Remote Preview interfaceConfigurationLocal configuration.
Color adjustment:
Drag the slide bar to adjust Brightness, Contrast, Hue, and Saturation. Click Default to reset them to original value.
Buttons Description
Drag the scroll bar to adjust the brightness of
channel
Drag the scroll bar to adjust the contrast of channel
Drag the scroll bar to adjust the saturation of
channel
Drag the scroll bar to adjust the hue of channel
Click this button to recover the default value of
brightness, contrast, saturation and hue.
Save the adjustment
PTZ control
Please connect speed dome to the device via RS485 firstly, make sure the protocol of the speed dome is supported by the
device and set the relative parameters manually. User can control the dome up, down, right, left or stop rotating on Control