COP-USA DVRHD-8D1 - Manual (Page 22)

16
Digital Video Recorder User Manual
User can click button and drag it anywhere with the left mouse
Click Menu button to pop up a window as Fig 4-2; user can also press MENU button on the front panel or operate with remote
controller to display the main menu. Click Setup icon will pop-up the configuration menu:
Fig 4-2 system setup
4.1 Basic configuration
Basic configuration includes three sub menus: system、date& time and DST.
4.1.1 System
Step1: enter into system configurationbasic configurationsystem; refer to Fig 4-3:
Step2: in this interface user can setup the device name, device ID, video format, max network users, VGA resolution and language.
The definitions for every parameters display as below:
Device name: the name of the device. It may display on the client end or CMS that help user to recognize the device remotely.
Video format: two modes: PAL and NTSC. User can select the video format according to that of camera.
Password check: enable this option, user needs to input user name and password can do corresponding operations with the
relevant right in system configuration.
Show time: display time in live.
Show wizard: tick off this item, there will display an opening wizard with time zone and time setup information
Max network uses: set the max user amount of network connection
VGA resolution: the resolution of live display interface, range from: VGA800*600,VGA1024*768,VGA1280*1024and CVBS