COP-USA DVRHD-8D1 - Manual (Page 40)

34
Digital Video Recorder User Manual
Server port: communication port.
Step 3: If user selects the "Obtain an IP address automatically", the device will distribute IP address, subnet mask, and gateway IP
and DNS server.
Step 4: enable PPPoE to directly connect the DVR to internet via ADSL, and then input the user name and password. Next, click
TEST button to test the effectiveness of the relevant information.
Fig 4-29 network configuration-network
4.6.2 Sub stream
Step 1: enter into system configurationnetwork configurationsub stream; refer to Fig 4-30:
Step 2: select fps, resolution, quality, encode and max bit rate
Step 3: user can setup all channels with same parameters. Tick off “all” to do relevant setup.