COP-USA DVRHD-8D1 - Manual (Page 30)

24
Digital Video Recorder User Manual
4.3.4 Stamp
Stamp：User can overlap the channel name and time stamp
on video.
Step1: enter into system configuration record
configuration stamp; refer to Fig 4-14:
Step2: tick off camera name, time stamp; click Setting
button. User can use cursor to drag the camera name and
time stamp in random positions, referring to below Figures:
Step3: user can setup all channels with same parameters.
Tick off “all” to do relevant setup.
Fig 4-14 record configuration-stamp
Before drag after drag
4.3.5 Recycle record
Step1: enter into system configurationrecord configurationrecycle record;
Step2: tick off recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding when
HDD is full; if user disenables this function, it will stop recording when HDD is full.
Step3: click “default” button to restore default setting; click “apply” to save the setting; click “exit” to exit current interface.