COP-USA DVRHD-8D1 - Manual (Page 120)

4/8/16 CH DVR Quick Start Guide
Fig 4-4 Motion detection interface
Enter Motion detection area (refer to Fig 4-5) to set Sensitivity and Detection
area.
Fig 4-5 motion detection area setup
4.2.4 Senor Alarm Recording
Enter into main menu-Alarm configuration-Sensor alarm (refer to Fig 4-6), and
enable Detection first. Then setup the device type.
Fig 4-6 sensor alarm record
Enter into Trigger configuration, select alarm out and recording cameras and
linked PTZ; set Alarm out hold time and Buzzer hold time. Click OK to save
settings.
4.3 Playback